LMG500 – 1 to 8 Channel Precision Power Analyzer
Typical Applications:
- Precision Power Analyzer for enhanced requirements.
- Best for measurements on inverters, switching power supplies, lightings and switched power electronics with short pulse duration <100ns
- 1 to 8 power channels
- Isolated measurement inputs with extremely low capacitance and highest dynamics CMR and interference immunity
- 3MSamples/s continuously gap free measuring process
- Harmonic and interharmonic analysis up to 99th harmonic resp. up to 99 interharmonics
- Analog and digital in/outputs
- Additional inputs for current sensors
- Auto-scaling current sensors compensated in phase and amplitude
- PC interfaces
- Graphical colour display to show measured values, wave form, diagrams of calculated values, bar charts and vector diagrams (fresnel diagrams)
- Ergonomic user friendly interface
- Formula editor
- LabVIEW driver
- Model LMG500
- Channels 1 – 8
- Frequency DC – 10MHz
- Basic accuracy 0.025%
- Voltage ranges 3 – 1000V
- Current ranges 20mA – 32A
- Interfaces RS232, Printer (optional: IEEE 488, USB, Ethernet, Process signals)
- Warranty 2 years
Available options
- L50-O1 IEEE488.2 Interfaces
- L50-O2USB USB Interface (USB Driver download)
- L50-O2LAN 10/100Mbit Ethernet Interface (LAN Driver download)
- L50-O3 Process signal interface
- L50-O4 Flicker meter acc. to EN61000-4-15
- L50-O5 Triggering on events
- L50-O6 Star to delta conversion
- L50-O8 Harmonics up to 99th
- L50-O9 CE-Harmonics up to 40th acc. to EN61000-3-2
- L50-O10 DSP extension module for LMG500
- L50-O16 MotorTorque-SOFT (Info Sheet)
- L50-O20 Measuring plug-in module
- LMG-CONTROL-WA WA-Analysis for LMG-CONTROL-B
Available Accessories
- L50-Z01 Kit to mount LMG500 into 19″-rack
- L45-Z04 Carrying case for 1 – 4 channel LMG500
- L45-Z05 Carrying case for 5 – 8 channel LMG500
- L50-Z13 Cable for coupling a second LMG500 (for power measurement channels 5-8)
- L50-Z14 Adapter for LMG500 to connect sensors and current clamps
- L50-Z18 Adapter for incremental speed sensor onto LMG500 measuring channel (I-Sensor input)
- L50-Z19 Adapter to synchronize
- L50-Z318 RS232 – Ethernet – converter, 10/100Mbit (LAN Driver download)
Download the datasheets and manuals for LMG500 and accessories through our download centre